Tank Volume Calculator

Tank Volume & Fill Calculator

Tank Type:                    Horizontal Cylinder                   Vertical Cylinder                   Rectangle                   Horizontal Oval                   Vertical Oval                   Horizontal Capsule                   Vertical Capsule                 

(inside dimensions)

Feet

Inches

Length (l) =

length feet

length inches

Diameter (d) =

diameter feet

diameter inches

Filled Depth (f) =

fill depth feet

fill depth inches

Answer:

Report a Problem

Get a Widget for this Calculator

© Calculator Soup

Share this Calculator & Page

Tank Schematic: Horizontal Cylinder

Calculator Use

Estimate the total and filled volumes of tanks such as oil tanks and water tanks.  Assumes inside dimensions of the tank.

*Actual fill volumes will differ.  Tank volume calculations are based on tank geometries shown below.  These tank shapes are calculated assuming exact geometric solid shapes such as cylinders, circles and spheres.  Actual water and oil tanks may not be perfect geometric shapes or might have other features not accounted for here so, these calculations should only be considered estimates.

Methods to calculate the volume of tanks and the volume of a liquid inside a tank.

These calculations will give you cubic measures such as ft3 or m3 depending on your units of measure.

Horizontal Cylinder Tank

Total volume of a cylinder shaped tank is the area, A, of the circular end times the length, l. A = πr2 where r is the radius which is equal to 1/2 the diameter or d/2. Therefore:
V(tank) = πr2l

Calculate the filled volume of a horizontal cylinder tank by first finding the area, A, of a circular segment and multiplying it by the length, l.

Area of the circular segment, the grey shaded area, is A = (1/2)r2(θ - sinθ) where θ = 2*arccos(m/r) and θ is in radians.  Therefore, V(segment) = (1/2)r2(θ - sinθ)l.  If the fill height f is less than 1/2 of d then we use the segment created from the filled height and V(fill) = V(segment).  However, if the fill height f is greater than 1/2 of d then we use the segment that is created by the empty portion of the tank and subtract it from the total volume to get the filled volume; V(fill) = V(tank) - V(segment).

Vertical Cylinder Tank

Total volume of a cylinder shaped tank is the area, A, of the circular end times the height, h. A = πr2 where r is the radius which is equal to d/2. Therefore:
V(tank) = πr2h

The filled volume of a vertical cylinder tank is just a shorter cylinder with the same radius, r, and diameter, d, but height is now the fill height or f.  Therefore:
V(fill) = πr2f

Rectangle Tank

Total volume of a rectangular prism shaped tank is length times width times height. Therefore,
V(tank) = lwh

The filled volume of a rectangular tank is just a shorter height with the same length and width.  The new height is the fill height or f.  Therefore:
V(fill) = lwf

Horizontal Oval Tank

Volume of an oval tank is calculated by finding the area, A, of the end, which is the shape of a stadium, and multiplying it by the length, l.  A = πr2 + 2ra and it can be proven that r = h/2 and a = w - h where w>h must always be true.  Therefore:
V(tank) = (πr2 + 2ra)l

Volume of fill of a horizontal oval tank is best calculated if we assume it is 2 halves of a cylinder separated by a rectangular tank.  We then calculate fill volume of 1) a Horizontal Cylinder Tank where l = l, f = f, and diameter d = h, and 2) a Rectangle Tank where l = l, f = f, and rectangle width w is a = w - h of the oval tank.
V(fill) = V(fill-horizontal-cylinder) + V(fill-rectangle)

Vertical Oval Tank

To calculate volume of an oval tank find the area, A, of the end, which is the shape of a stadium, and multiply it by the length, l.  A = πr2 + 2ra and it can be proven that r = w/2 and a = h - w where h>w must always be true.  Therefore:
V(tank) = (πr2 + 2ra)l

To calculate fill volume of a vertical oval tank it is best if we assume it is 2 halves of a cylinder separated by a rectangular tank. With r = w/2 = height of the semicircle ends, we can define 3 general fill position areas.

• Fill, f < r
  We calculate fill volume using the circular segment method, as in a Horizontal Cylinder Tank, for the filled portion.
• Fill, f > r and f < (r+a)
  The filled volume is exactly 1/2 of the cylinder portion plus the volume of fill inside the rectangular portion.
• Fill, f > (r+a) and f < h
  We calculate fill volume using the circular segment method, as in a Horizontal Cylinder Tank, for the empty portion.  Volume will be V(tank) - V(segment).

Horizontal Capsule Tank

We treat a capsule as a sphere of diameter d split in half and separated by a cylinder of diameter d and height a.  Where r = d/2.
V(sphere) = (4/3)πr3, and
V(cylinder) = πr2a, therefore
V(capsule) = πr2((4/3)r + a)

Volume of fill for a horizontal capsule is done by using the circular segment method for the Horizontal Cylinder and, with a similar approach, using calculations of a spherical cap for the sphere section of the tank where,
V(spherical cap) = (1/3)πh2(3R - h)

Vertical Capsule Tank

To calculate the volume of a vertical capsule tank treat the capsule as a sphere of diameter d split in half and separated by a cylinder of diameter d and height a.  Where r = d/2.
V(capsule) = πr2((4/3)r + a)

To calculate fill volume of a vertical capsule calculate in a fashion similar to the method used for the Vertical Oval Tank where r = d/2 = height of each hemisphere end.

• Fill, f < r
  We calculate fill volume using the spherical cap method, for the filled portion.
• Fill, f > r and f < (r+a)
  The filled volume is exactly 1/2 of the sphere portion plus the volume of fill inside the vertical cylinder portion.
• Fill, f > (r+a) and f < h
  We calculate fill volume using the spherical cap method for the empty portion.  Volume will be V(tank) - V(spherical cap).

Posted in: Tank Volume Calculator